uttu

hello It is UTTU CAD .

UTTU CAD v.1.11 We would like to inform you about the update .

(1)    Added ability to align graded patterns to selected lines .

< Grading Selection >

① Grading Mode - Select Alignment - Select the baseline to align

- The pattern is aligned to the alignment baseline .

(2)    A function to convert the cutting line created when importing a dxf file worked on in another CAD into a seam allowance.

< City conversion >

① Pattern - Convert to seam allowance - Select the outline to be converted to seam allowance

- Converts outlines to lines .

- After checking the corner seam, erase the outline . ( Continuous line )

(3)    Ability to attach two patterns step by step to match the length and add notches at the aligned points

Pattern Walking

① Pattern walking - Select a point on the pattern to move - Select a point on the pattern to fix

(4)    Ability to import various DXF files

① File – Import – DXF – Select File – Open

-       You can load the file by selecting the size from the import options .

-       You can select from a list of sizes .

( You can load the saved size list .)

(5)    Ability to export DXF files in a variety of ways

① File – Export – DXF

② Choose from a variety of options

-       Select a pattern  / You can export by selecting the size .

(6)    You can cut even if the cutting line is not attached to the outline .

< Cutting the Pattern >

① Cut pattern - Select pattern - Right click to select cutting line

-    The pattern is cut in two at the locations where the selected line segment extends vertically .

-    You can cut even if the cutting line is not attached to the outline .

-    After cutting the pattern, the grain direction of the cut pattern is maintained .

-    After cutting the pattern, the grading values and notches of the cut portion are maintained .

(7)    After attaching the pattern, the grain direction of the attached pattern is improved to be the same as the direction of the reference pattern .

< Merge Patterns >

① Paste pattern – Right click on the baseline selection – Right click on the line to paste – Select the baseline – Select the move point

-     The patterns merge in the direction of the pattern's pattern with the baseline .

-       After pasting the pattern, the grading values and notches of the pasted pattern have been improved to be maintained .

(8)    Multiple selection is possible during parallel grading , and it has been improved to apply to other patterns as well .

Parallel Grading

① Grading mode – Parallel grading – Select points to apply parallel deviation

-       Multiple selections of parallel grading are possible , allowing you to specify them all at once .

(9)    Improved ability to select continuous lines when grading length .

① Grading Mode - Length Grading - Right-click on the continuous line to be modified for length deviation

-       When you select the line for which you want to correct the length deviation, a window will appear .

② After selecting the continuous line to copy the deviation – Check the reference point location – Select the direction – Check the preview – Apply

-       When you select a continuous line to copy the deviation from , the deviation part will be modified .

-       Select the reference point for the length deviation to move , preview the correction line, and then apply it .

-       The sleeve armhole length is graded by the deviation value of the body armhole .

(10)   Deviation Measurement and Deviation Table Improvement

< Deviation Measurement >

① Grading mode – Deviation measurement – Select lines to measure sum – Right click

-       '+1' is the deviation and length of the first line , '+2' is the deviation and length of the second line , and next to it shows the sum of the two lines .

② Select the '-' option - Select the lines to measure deviation - Right click

-       '-1' represents the first line , '-2' represents the second line , and the sum of the two lines is displayed next to them .

-       On the far right is the difference between + sum and - sum , and the ratio represents - sum / + sum .

Please refer to the manual for detailed explanations of each function .

Go to manual

*** UTTU CAD can be automatically updated when you log in . ***

※ UTTU CAD The Personal version has the following differences from the Pro version :

- Watermark is automatically inserted into the canvas .

- Float output is limited to 10 patterns at a time .

We will always do our best to provide better programs .

thank you .