hello It is UTTU CAD .
UTTU CAD v.1.12 We would like to inform you about the update .
(1) Provides 14 example files
<Example>
① Run program – Pop-up – Select pattern
- A pop-up will appear when you run the program for the first time .
If you do not select ' Show at startup ' , the pop-up will not appear , and you can find it again in the example file .
If you select “ Follow Skirt Pattern ,” you can learn the basic functions while making a skirt .
(2) Various lines ( lines shorter than the allowed length , overlapping lines ,
Added a feature to search and find internal lines outside the outline , unlocked tangent lines .
- However, this feature only works with the selection tool.
< Analysis >
① Draw – Select – Analyze – Select overlapping lines – Search
- Overlapping lines within the error range are displayed in red .
When you delete , all but one line of the overlapping part will be deleted, as needed .
(3) Added a feature to leave a pattern circle as an afterimage
< Pattern prototype >
① View – Activate pattern circular view
- You must enable the pattern circular view to see the circular lines .
② Pattern – Circle – Select pattern – Edit line of the pattern
- You can create , delete , and save pattern prototypes .
- The pattern circle is not selected by default , and snapping to find the position when modifying the pattern is applied .
- Select all (Ctrl + A) is available .
(4) Added the ability to check the actual size of lines on the screen
< Actual size >
- You can see the actual size on the monitor screen .
- Since it may differ depending on the user's screen settings , adjust the screen size in the settings and use it .
(5) Added the ability to change the outline and inner lines of a pattern
< Outline Conversion >
① Pattern - Convert Outline - Select Inner Line - Right Click
-
When opening a dxf file in TaCAD , if the pattern is entered as an outline rather than a seam allowance ,
When you convert an inner line to an outer line, the existing outer line changes to a cutting line .
(6) Improved grading so you can work on it in the same window.
< Grading mode : ctrl+G>
① Grading - Grading Mode
- The screen changes to grading mode , and you can perform grading work .
② Grading – Edit Mode
- After completing the grading task , click the Edit Mode button to switch to the drawing tool screen .
(7) When creating a pattern, add an option to remove the lines used to create the pattern and create it.
Allows immediate creation without moving .
< Creating a Pattern >
① Pattern – Create – Select pattern creation line ( automatic ) – Right click – Remove line used in pattern ( select option )
-
A pattern is created in place without moving the pattern .
-
If you want to use the pattern as it is in the drawing, use the option as per your choice .
(8) Improved ability to easily select the lines to merge when merging lines or apply them to patterns
< Merge >
① Draw – Merge – Select the starting line to merge – Right click – Select the lines to merge
- Merged lines merge into one .
- You can merge separate lines into a continuous line and then select them all at once with Selection ( Continuous Line ) .
(9) Improved the ability to change between locked and unlocked stitch lines when creating stitches
< Linkage >
① Pattern – Interlocking seams – Select a pattern with seams – Interlocked seams are changed to non-interlocked seams and non-interlocked seams are changed to interlocked seams
- Lock point ( the seam is visible as a surface ): The seam line is automatically updated based on the outline conditions .
- Unlocked seam allowance ( seam allowance is shown as a line ) Seam allowance line and outline are not related , and seam allowance line can be modified and used as needed .
( Unlocked seams during grading are not graded and exist in their original seam size .)
- Unlocked seams can be used by modifying the seam lines .
Please refer to the manual for detailed explanations of each function .
*** UTTU CAD can be automatically updated when you log in . ***
※ UTTU CAD The Personal version has the following differences from the Pro version :
- Watermark is automatically inserted into the canvas .
- Float output is limited to 10 patterns at a time .
We will always do our best to provide better programs .
thank you .
EN 
한국어 
简体中文 
日本語 
Tiếng Việt 
ខ្មែរ 