​

If you select the corresponding function and select the point to be aligned, the deviation value of that point is aligned according to the function (X value: 0 / Y value: 0 / X,Y value: 0).
You can select only one point, and you can also move the deviation value after changing the alignment.

 

If you select the basic function and then select a pattern, it returns to the initial alignment state.

 

You can multi-select "lines" between grading points, and a deviation table appears on the left when you right-click.

Random numbers are generated at the grading points of the selected lines and are used to distinguish which line it is in the measurement table.

 

You can measure the difference in length by selecting the option box at the top right.

Select Line A -> Right-click -> Select Line B -> Right-click = The value of Line A - Line B appears in the measurement table.

 

When importing DXF, depending on the type of CAD program, curves may occasionally be imported as multiple short lines.

This is a convenient feature that can be used at this time; clicking the start and end points to create a single line will automatically pop up a dialog box.

 

In the dialog box, you can set the direction of the selected line and the number of curve points, etc.

 

The Show/Hide item in the [View] tab has been added.

Individual items such as seam lines, interior lines, text, symbols, images, and seam allowances have been added.

The corresponding Show/Hide items {Print} or {Float} are all executed in a visible state.